What do you guy's think about running the same size front and rear tires? I was thinking after seeing them today at the show in Costa Mesa of running Bighorns 9" wide all the way around. Only if I can get them in a 12" rim size thow.

My opinion is I think they look good running same size all around but you might feel a little more bump steer running a wider tire up front.

Takes more steering effort, especially on pavement..... I went to a larger diameter steering wheel (15 1/2").... most peeps go with a smaller wheel, which will accentuate the problem.

I have an 06 rhino that I got used and it has the same on front and back but i need to get new ones and not sure what to buy

I tried 10" on all 4 corners.... It Sucked. Too much bump steer and too hard to turn.

I think the stock set up is the best unless you are in the dunes..... Then 10" on all 4 corners is ok.

__________________
2006 Rhino 660
BRP Stage 2 CDI
UTVCrap Sheave
Digital Dash
ITP T-7C Wheels (5+2 front offset & 2+5 Rear)
Big Horn Tires (25x8x12 & 25x10x12)
LSR MTS +3 Mid Travel Kit
Bilstein Shocks w/ Eibach Springs 250lb front & 350lb rear

Anyone have 8" all the way around?